Restoring every timber floor in a home at once is a bigger project, but it gives the best result: one even colour and sheen from room to room. Here is how a full house restoration usually runs.
Inspection and quote
It starts with photos on WhatsApp or a free site inspection. We check the timber, measure the rooms, note any repairs and agree the finish with you. You get a clear quote before anything begins.
Before
AfterPreparing your home
Clear the rooms of furniture, take down curtains and rugs, and tell us about pets or anything fragile. Most families stay at home and simply keep the work area clear.
Repairs come first
Loose parquet blocks are re-fixed, gaps are filled, squeaks are fixed and missing pieces are replaced before any sanding. Fixing first means the finish goes onto a solid floor.
Sanding and edges
The main machine sands the open areas and edging tools reach along walls and cabinets. We use dust-containment equipment and cover nearby areas, then clean up thoroughly.
Stain and finish coats
If you want a deeper or more even tone, stain is tested on a small area first. Then the varnish goes on in thin coats in the sheen you chose.
Drying and curing
Light foot traffic is usually fine once the coat is touch-dry. Heavy furniture and rugs wait longer so the finish can cure properly. We give you clear times for the product used.
Moving back in
Put felt pads under furniture, lift rather than drag, and use mats at entrances. Most homes take a few days in total, including drying time, and we confirm the timing after inspection.
Thinking about restoring the whole home? Send us photos of each room and rough sizes, and we will plan it with you.
Common questions
Do I need to move out during the work?
Usually no. Keep the work area clear and we will advise on drying times before you walk on the floor.
How do I prepare before sanding day?
Clear the rooms of furniture, take down curtains and rugs, and tell us about pets or anything fragile. We cover the rest and agree access times with you.
When can furniture go back?
Light use comes first and heavy furniture later, once the finish has cured. We give you specific times for the product used on your floor.
Get a free inspection
Send photos of your floor on WhatsApp for fast advice and a clear quote, anywhere in KL and Selangor.
WhatsApp Us