Clear, Low-Odour
and Quick
Water-based coating protects the timber while keeping its natural colour clear and light, with very little odour.
- It has far less smell than a solvent varnish, which suits condos, offices and homes where people stay during the work.
- You can walk on the floor and move furniture back about 2 hours after the last coat, so the room is back in use the same day.
- The floor is buffed smooth with a pad machine first, then every coat is laid by hand in thin, even layers.

How We Do It,
Step by Step
Every stage of a real water-based floor coating job, in order, with photos and videos from our own work.

Step 1 · Inspection
We check the timber and the old finish, and decide between full sanding or pad buffing and a fresh coat.
Step 2 · Repairs first
Loose boards and blocks are re-fixed and worn pieces replaced, so the coat goes onto a sound floor.
Step 3 · Machine sanding (worn floors)
Where the old finish is worn through or peeling, the sanding machine takes the floor back to bare timber.
Step 4 · Edges and corners
Edges and corners are sanded by hand so the whole floor is even, right up to the skirting.
Step 5 · Gap filling
Gaps and joints are filled by hand and sanded flush, so the clear coat shows an even surface.
Step 6 · Pad buffing by machine
A pad machine buffs the floor smooth. On floors that are dull but sound, this is where the job starts.
Step 7 · Dust clean-up
The floor is vacuumed and corners are cleaned, because a clear coat shows every speck of dust.
Step 8 · Water-based coats by hand
Thin, even water-based coats are laid by hand in matt, satin or gloss. They stay clear and have little odour.

Step 9 · Back in use
About 2 hours after the last coat you can walk on the floor and move the furniture back.
Need the room back the same day? A water-based coat dries fast enough to walk on and use about 2 hours after the last coat.

Trusted by
Local Homeowners
The numbers behind more than 11 years of wood floor sanding, polishing and varnishing across Kuala Lumpur and Selangor.
Free site inspection across KL & Selangor · Quotes on WhatsApp · Call +60 17-581 7976
Watch a
Water-Based Coat
Clips from our own jobs: pad buffing first, then the clear water-based coat laid evenly by hand, room by room.
Water-based coat
A clear, low-odour coat laid thin and even by hand.
Pad buffing first
The floor buffed smooth with a pad machine before coating.
Condo floor
Two of the team coating a condo floor edge to edge.
When Water-Based
Makes Sense
Situations where a clear, quick-drying, low-odour coat is the better choice for your home and your timber.
You stay at home
Low odour makes it easier to live in the house during the work.
Strict condo hours
Quick drying fits building rules on working hours.
Light timber
Keeps pale and natural timber clear instead of turning amber.
Quick refresh
Pad buffing and a fresh clear coat for floors that are dull but sound.
Offices and shops
Floors can be back in use the same day.
Children and pets
Rooms can be used again soon after the last coat.
Our Water-Based Floor Coating
Process
A simple six-step hardwood polishing routine, so you always know what comes next, from inspection to handover.
- 1
Floor check
We check the timber and the old finish to make sure a water-based coat will bond well.
- 2
Repairs first
Loose boards and blocks are re-fixed and gaps filled.
- 3
Pad buffing by machine
The surface is buffed smooth with a pad machine, or fully sanded if it is worn through.
- 4
Dust clean-up
Corners and ledges are blown out and the floor vacuumed before coating.
- 5
Coats laid by hand
Thin, even water-based coats are laid by hand in matt, satin or gloss.
- 6
Back in use
Walk on the floor and move furniture back about 2 hours after the last coat.
What the Job
Includes
Every water-based floor coating job includes these steps, from preparing the surface to the final clear coat.
- Timber and finish check
- Repairs before coating
- Pad buffing by machine
- Dust clean-up before coating
- Water-based coats laid by hand
- Room back in use after about 2 hours
Water-Based Floor Coating across Kuala Lumpur and Selangor
We offer water-based floor coating for houses, condos, offices and shops across the Klang Valley, with planned trips to Johor Bahru and Malacca. See our service areas.

Keeping the
Finish Fresh
- Use a cleaner made for sealed timber floors, and avoid harsh or soapy products.
- Sweep or vacuum often; grit is the main cause of fine scratches.
- Place mats in high-traffic spots such as doorways.
- Re-polish when the shine fades, before the finish wears through.
Water-Based Floor Coating
FAQs
Quick answers to what people ask us most about water-based coating, like: how soon can I use the floor again?
How soon can I use the floor?
Does water-based coating smell?
Will it change the colour of my floor?
Is it as tough as varnish?
Can it go over my existing finish?
How much does water-based coating cost?
Tell Us About
Your Floor
Send your details and WhatsApp opens with the message ready. Floor photos help us quote. Or see all contact options.
- Free site inspection available
- Quick replies on WhatsApp
- Serving Kuala Lumpur, Selangor, Johor Bahru and Malacca
More Ways to
Restore Floors
See how we handle floor sanding and polishing, timber restoration and varnishing, and parquet installation and repair.

Wooden Floor Sanding & Polishing
Scratched, dull or worn wooden floors? See how EVA sands back to clean timber and re-polishes it.
View this service →
Timber Floor Restoration & Varnishing
Faded, gapped or peeling timber planks? EVA repairs, strips and varnishes plank floors in KL & Selangor.
View this service →
Parquet Floor Installation & Repair
Loose, hollow or missing parquet blocks? EVA re-fixes, replaces and fills the pattern, then buffs it even.
View this service →