Why Parquet
Is Different
Parquet is built from many small blocks laid with the grain running in different directions. That is what makes the pattern attractive, and it is also why parquet cannot be treated like a plain plank floor. Heavy sanding across changing grain can leave marks, and a block that has lost its glue will keep lifting no matter how nice the surface looks.
So we repair from the bottom up. Loose and missing blocks are dealt with first, gaps are filled, and only then is the surface buffed. Buffing uses fine pads to refresh the finish with very little material removed, which is gentler on thin blocks than full sanding.
Tap test included
Free site inspection across KL & Selangor · Quotes on WhatsApp · Call +60 17-581 7976
Find the fault,
see the fix
Tap a marker on the sample parquet floor to see what each problem means and how we repair it.
Hollow block
The block sounds empty when tapped, which means the adhesive underneath has failed. We lift it, clean the bed and re-fix it so it sits flat again.
Missing block
A gap in the pattern. We cut or source a matching block, fit it into the pattern and blend the colour as closely as the species allows.
Open gap
Joints that have opened between blocks collect dirt. They are cleaned and filled so the surface reads as one piece.
Lifting edge
A corner or edge that has curled up catches shoes and can break. We press, re-glue or replace it depending on the damage.
Dull, cloudy finish
Worn coating shows as patchy sheen. After repairs, buffing and a fresh coat bring back a uniform surface.
Signs Parquet
Needs Repair
Parquet problems rarely fix themselves. These are the common early warnings.
A hollow sound underfoot
Tap a block with a knuckle. A drum-like sound points to adhesive that has let go.
Blocks popping up at the corners
Edges that lift are tripping hazards and often crack when stepped on.
Holes in the pattern
Missing blocks tend to come from old repairs or blocks that worked loose and got lost.
Widening joints
Dirt builds up in gaps, and the pattern starts to look uneven.
Cloudy or patchy shine
Foot traffic wears the coating in lanes and leaves the pattern looking dull.
Squeaks in one area
Often a few loose blocks over the same patch of subfloor.
How we repair
and buff parquet
What happens and when: tap and map first, recoat and cure last.
- 01
Tap and map
We tap across the floor and mark every hollow, loose and missing block so the work is planned before anything is lifted.
- 02
Lift and clean the bed
Loose blocks are removed and old adhesive is cleaned off, giving the new glue a sound surface.
- 03
Re-fix or replace
Blocks go back in pattern order. Where one is damaged or gone, we fit a matching replacement.
- 04
Fill and level
Gaps are filled and the new blocks are levelled with their neighbours.
- 05
Buff the surface
A buffing machine and fine pads refresh the surface across the whole pattern, with minimal wood removal.
- 06
Recoat and cure
A fresh protective coat evens out the sheen and we advise on drying before normal use.
What parquet
repair includes
Small steps that save time on the day, like: tap test and block map.
- Tap test and block map
- Re-gluing of hollow blocks
- Replacement of missing blocks
- Gap filling
- Machine buffing
- Protective recoat
Parquet repair in Bangsar, Mont Kiara and Damansara
Many parquet floors are found in apartments and condominiums. We take on parquet repair and buffing in Bangsar, Mont Kiara, Damansara and across Kuala Lumpur, and can coordinate access with building management when needed. Read more on our Kuala Lumpur and Selangor service area pages.

Keeping
Parquet Bright
- Wipe spills at once; water under blocks can loosen the adhesive.
- Put mats by doors and under plant pots.
- Use soft felt on furniture feet and avoid dragging.
- Report a hollow block early, because small repairs are quicker than large ones.
Parquet
Repair FAQs
8 honest answers, starting with: Can missing parquet blocks be replaced?
Can missing parquet blocks be replaced?
Why does my parquet sound hollow?
Is buffing the same as sanding?
Can you match my old parquet colour?
Why are gaps appearing between my blocks?
How do I get a parquet repair quote?
How long does replacing a few parquet blocks take?
Why does my parquet look uneven after years of use?
Tell us about
your floor
Send your details and we will open WhatsApp with the message ready. Photos of the floor help us give a clearer quote. You can also see all our contact options.
- Free site inspection available
- Quick replies on WhatsApp
- Serving Kuala Lumpur, Selangor and the Klang Valley
Other Restoration
Services
See how we handle Wooden Floor Sanding & Polishing, Timber Floor Restoration & Varnishing and Hard Wood Floor Polishing.

Wooden Floor Sanding & Polishing
Scratched, dull or worn wooden floors? See how EVA sands back to clean timber and re-polishes it.
View this service →
Timber Floor Restoration & Varnishing
Faded, gapped or peeling timber planks? EVA repairs, strips and varnishes plank floors in KL & Selangor.
View this service →
Hard Wood Floor Polishing
Merbau, teak, balau and other hardwoods need careful polishing.
View this service →